Sean Meighan
Software => xLights Convert => Topic started by: Richard on February 06, 2014, 09:46:08 AM
-
Sean I am having an issue when converting a lms file into Xlights\Nutcracker when I am converting it gives me these warnings. And I know most of the channels have been deleted in LOR or do not have a device type selected. and my channel configuration is correct in Nutcracker to match my LOR channels
Reading: C:\Users\Rich\Documents\Light-O-Rama\Sequences\A last Illusion 2.lms
Reading LOR sequence
Track 1 length = 32629 centiseconds
WARNING: deer1 and silver tree map to the same channel
WARNING: deer 2 and led branches map to the same channel
WARNING: snow and wreath R map to the same channel
WARNING: rudolph and small cains map to the same channel
WARNING: wreath L and mega tree 1 map to the same channel
WARNING: tree roof 3 and post1-5 map to the same channel
WARNING: tree roof 4 and post1-4 map to the same channel
WARNING: tree roof 5 and post1-3 map to the same channel
WARNING: tree roof red 1 and post1-2 map to the same channel
WARNING: red roof 2 and post1 map to the same channel
WARNING: red roof 3 and post2-5 map to the same channel
WARNING: red roof 4 and post2-4 map to the same channel
WARNING: red roof 5 and post2-3 map to the same channel
WARNING: tree roof green 1 and post2-2 map to the same channel
WARNING: green roof 2 and post2-1 map to the same channel
WARNING: green roof 3 and post3-5 map to the same channel
WARNING: green roof 4 and post3-4 map to the same channel
WARNING: green roof 5 and post3-3 map to the same channel
WARNING: blue roof tree 1 and post3-2 map to the same channel
WARNING: blue roof 2 and post3-1 map to the same channel
WARNING: blue roof 3 and bush1 map to the same channel
WARNING: blue roof 4 and cane 1-1 map to the same channel
WARNING: blue roof 5 and cane 1-2 map to the same channel
WARNING: channel 'DMX 14.1 60 (B)' is unmapped
# of mapped channels with effects=4898
# of effects=2731296
Media file=16 A Last Illusion.wma
New # of time periods=6525
New data len=267694650
Writing xLights sequence
Finished writing new file: C:\Users\Rich\Documents\xLights\A last Illusion 2.xseq
Finished converting all files
Thanks
Richard
-
In LOR, if you run the Verifier subroutine (from the Control Panel) it will usually pinpoint the conflicts so that you can fix it at the source.
Until you do, you will get those errors from the conversion. Or, do like I do and ignore them since it doesn't seem to affect things. ;)
-
Will do thanks.
-
Ran the Verifier and it shows no channel conflicts
-
Well, I don't know. That always pinpointed my conflicts.
Are you all LOR protocol or all DMX or combo?
sent from my Galaxy Note
-
Make sure you are using the latest and greatest xLights.... There have been a BUNCH of changes to the LOR import code lately to try and get things working properly.
Beyond that, feel free to send me the sequence (dan at kulp dot com) and I'll happily take a look. A quick description of you network setups in LOR would be helpful, but not required.
Dan
-
Actually, the "not having a device type" thing might be part of it. We'll still map those channels. Mostly because LMS files generated from some of the other tools don't include device types on anything, but it's also due to the device types not needing to match at all with what's on the xLights side.
Deleted channels is different. I wouldn't have expected them to be in the lms file at all.
Dan
-
Dan I will zip the LMS file and send it to you. I down load every update to Nutcracker as it comes out it is almost like an addiction can not wait for the next one
Richard
-
need your email address the one posted is not working
Richard