Sean Meighan

Software => Xlights Setup => Topic started by: THurrle on February 08, 2014, 08:23:08 AM

Title: E1.31 in nutcracker
Post by: THurrle on February 08, 2014, 08:23:08 AM

I have done my set up and am just asking if this looks correct.Here is how I have the  controllers set up for the universes.
Universes 1-4 E682 pixel tree
Universes 5-6 E682 #2 pixel tree
Universe 7 E682 # 2 three pixel arches each arch 50 pixels
Universe 8 E1.31 bridge set up for 255 renard channels using xbee radios w/RenW board
Universe 9 E 1.31 bridge set up for 8 renard channels using xbee radios w/RenW board
See Attached.
Thanks for the input.
Terry

[attachment deleted by admin]

Title: Re: E1.31 in nutcracker
Post by: pwalstead on June 06, 2014, 10:29:51 AM

It depends on the length of your strings and number of outputs you are using per "bank". For example 16 fifty node strings would require 2400 channels which would put your last channel in universe 5 channel 360.