Sean Meighan
Welcome => Do You Need Help? Post it here => Topic started by: jeffl on June 24, 2015, 09:21:28 PM
-
I'm trying to understand how to setup my AC single color Mega Tree Models but I'm not sure I can do what I need. My current setup has:
String 1 at 3PM
String numbers increment counter clockwise
Is it possible to setup the model to work like this?
The attached image is the closets I have come where strand 1 is at 12Pm with counter clockwise rotation which I think will work if I adjust my physical setup 1/4 turn counter clockwise.
Any suggestion on if how I should do this?
Thanks
-
The starting corner is means "Where is pixel #1 on this model?"
The location of strand #1, is up to you when you physically build the tree.
If you want strand #1 to be at 3-o-clock, then you'd build the NC model with starting corner as either top right or bottom right depending on where pixel #1 is on your string, and you'd set it up as a 180 tree.
A 270 tree visually puts the first and last strands at 10 and 2.
A 360 tree visually puts the first and last strands at 12:00
The 90 is at roughly 8 and 4
Hope that helps.
-
I think I'm starting to understand. I think the answer in my case is need to setup the physical strand 1 to match the software options. i.e with strand 1 at 12.