Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: djohnson1810 on July 04, 2015, 05:32:45 PM

Title: Ramps and Odd Colors
Post by: djohnson1810 on July 04, 2015, 05:32:45 PM
Hey.  I am working on migrating from LOR to xLights.  I am trying to relearn how to do things I could automatically do in S3.  Two things I have not figured out how to do in xLights.

1-  I would like to ramp up from say 25% to 75%.

2- Sometimes I try to get a specific color to emulate incandescent lights.  For example white.  While I don't have the exact numbers in front of me, in LOR I can set each RGB channel to a specific percentage to obtain somewhat of an incandescent white.  Where would I go to do that in xLights?

Thanks!

Don
Title: Re: Ramps and Odd Colors
Post by: Gilrock on July 04, 2015, 11:11:28 PM
Use the On effect for a ramp.  It has a Start Intensity and End Intensity setting which allows you to create any ramp you like.  For a specific color click on the color palette and change the color to any color you like.  It will open a color picker dialog and you can create a custom color with any red, green, blue values you like.
Title: Re: Ramps and Odd Colors
Post by: djohnson1810 on July 05, 2015, 11:33:25 AM
Thanks.  I had trouble finding the color palette, but I eventually did.
Title: Re: Ramps and Odd Colors
Post by: Mike_G on July 05, 2015, 04:58:52 PM
I can't seem to get the ramps to cooperate. It seems that I have to increase the cycle count to get it to work?
Title: Re: Ramps and Odd Colors
Post by: Gilrock on July 05, 2015, 06:40:37 PM
You only use cycle count if you want it to fade up or down more than once for the length of the effect.  Normally it should be 1.0.