Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: wmilkie on August 18, 2015, 03:26:47 PM

Title: superstar to XL4 conversion; channels are off
Post by: wmilkie on August 18, 2015, 03:26:47 PM

I don't know if this is a bug or me, so I thought I'd post it here first
vs 4.1.13

I created a simple 16 pixel tree in LOR Visualizer

imported that into superstar, created a simple sequence; plays fine here

Imported it into Nutcracker

when I play it, some of the channels overlap in the sequencer screens or layout screens

The setup/network is using E1.31

setup pixel tree prop model correctly; doesn't seem to matter what SS import I use, several channels seem to overlap
so I'm stumped

Title: Re: superstar to XL4 conversion; channels are off
Post by: Phrog30 on August 18, 2015, 03:39:36 PM

Here's a tutorial.

https://m.youtube.com/watch?v=PTHhvppJwCA (https://m.youtube.com/watch?v=PTHhvppJwCA)

I recommend using ccr mode instead of visualizer mode when doing the Superstar stuff, just a lot easier.

Title: Re: superstar to XL4 conversion; channels are off
Post by: wmilkie on August 18, 2015, 07:26:39 PM

thanks for the link
I found another detailed video on converting SS to XL4, followed it verbatim, same results; some of the effects are synced perfectly, others aren't synced correctly

I haven't tried using CCR mode for conversion, I'll try that to, thanks

Title: Re: superstar to XL4 conversion; channels are off
Post by: Phrog30 on August 18, 2015, 07:31:57 PM

Check out this thread http://nutcracker123.com/forum/index.php?topic=1560.0 (http://nutcracker123.com/forum/index.php?topic=1560.0), if some effects work and others don't then it might be working to the best of the utility.