Sean Meighan

General => The Water Cooler => Topic started by: kentd on September 12, 2015, 06:08:57 PM

Title: Mounting Problem for a silicone Strip
Post by: kentd on September 12, 2015, 06:08:57 PM

I am trying to glue some velcro to the back of a 60/20 strip to use on a food stand to draw attention to the stand. I have tried using epoxy for plastic but it just lets the velcro strip peel off. Does anyone have any experience making the glue stick to the silicone strip, any ideas would be appreciated.
Thanks
Kent

Title: Re: Mounting Problem for a silicone Strip
Post by: Steamyrotter on September 12, 2015, 06:16:51 PM

I would try using silicone sealant.
(Bathroom type sort of thing!)
Will take a little longer to set up and cure but will stick to it!

Use some tape to hold it whilst it sets.

Good thing too is it will remain flexible.

Title: Re: Mounting Problem for a silicone Strip
Post by: tomwb301 on September 13, 2015, 01:38:13 PM

This is where I look when I am gluing things together.

http://www.thistothat.com/