Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: Tenersaxman3000 on October 31, 2015, 08:05:28 PM

Title: DMX Values
Post by: Tenersaxman3000 on October 31, 2015, 08:05:28 PM
Hi -

In x4
Would like to be able to assign a DMX value from 0-255...

Using a DMX dongle to control Media playback, and media server is just quite fussy about the values.

o-100% does not add up to talking with the media. It wants to be 0-255 control on each channel.

For example

0- off
1- media play back 1
2- media play back 2
3 - media play back 3

221 -Media play back 221
through value 255

Any suggestions?

I am struggling to program around it.
Each value is so specific.
Title: Re: DMX Values
Post by: Gilrock on November 01, 2015, 07:42:53 PM
Its on my virtual todo list to add a DMX control effect.
Title: Re: DMX Values
Post by: Steamyrotter on November 02, 2015, 04:52:03 AM
Use the key bindings to set up the levels you want as a % off 255
Then set up a simple model with the amount of channels you need and assign them a single colour
(Eg red)
Then use the key binding to apply the appropriate dimming level to those channels

Bit of a work around but you only need to set it up once