Sean Meighan
Software => Bugs in xLights/Nutcracker => Topic started by: Realtor Mike on November 26, 2015, 02:16:33 PM
-
Sean helped me with my setup and was very helpful. Everything is working except for one of my single strand channels. It works in test mode, but not when running a sequence.
-
I'm wondering if the channel on the model isn't correct?
-
When u say not working - is that it does not come on or does but incorrectly ?
Check that the color assigned is correct and matches your definition or is white - this is the most common problem.
If that is correct - then try dropping a White ON for 5 secs in a new seq and see what happens (to ensure that there is no overlap with another model definition)
-
Here is an update that perhaps will help you help me. The channel in question works on one of my five sequences, so it has to be a software issue is my guess. What do you suggest?
-
Might help to post an image of the sequence data and model properties of the sequence/channel that does not work.
-
How do I obtain the data?
-
Screen shot of model screen, screen shot of the sequencer tab that shows effects dropped on that model. Use windows snipping tool to make screen shots or do a print screen and then paste into paint
Sent from my iPhone using Tapatalk
-
Sean, this was from the model setup you and I did on the phone. Nothing is coming up on the preview, but the lights work except for the House Upper.
-
post picture of setup tab, also post picture of model screen showing House Upper.
Test the channel using the TEST tab for that particular channel.
-
Here are the screen shots with House Upper below the matrix, and the test worked fine. Do you think I should try and reconvert the LOR files?
-
After I sent those screen shots, I decided to try one more thing. I opened one of my sequences and re-imported effects to refresh my models. The first was a success and I did it to the other sequences and everything now works. Thank you for being patient and working with me. We shall see how tomorrow night goes.