Sean Meighan
Software => xLights Convert => Topic started by: harrison0550 on June 21, 2014, 02:53:07 AM
-
Forgive me if this is a known issue but I have not messed with the lights much this summer.
Has anyone else had an issue with converting LOR files to SEQ files in the latest release of Xlights?
On xlights version 3.2.14 my conversions go through perfectly......
(https://dl.dropboxusercontent.com/u/68319287/old%20version.JPG)
However on the latest version 3.4.1 conversion seems to be broken with the same lms file. Hundreds of channels are unmapped and doesnt appear to be reading the LOR channels and DMX universes correctly from the LMS......
(https://dl.dropboxusercontent.com/u/68319287/new%20version.JPG)
I'm not sure what version after 3.2.14 where the converting broke as I haven't kept up to date on all releases like I should have. I reinstalled 3.2.14 and everything is working fine as long as I run the older version. Anyone else tested?
[attachment deleted by admin]
-
Rather than a new thread, thought I was just tack on to my current LOR conversion situation. Since the above thread was posted, the latest releases have a new checkbox 'Map empty LMS channels.' So I check that but instead of converting 112 LOR channels, xLights converts 115. The difference is 3 dummy rows used for beats - there is no LOR channel assigned to them. If I remove them and convert again, 112 channels converted and everything is mapped correctly. If I uncheck the 'Map empty LMS channels', then 32 channels with no effects (singing faces) are not mapped but all the other channels are off by this difference. Any others have this situation? For now, I can just create a temp file with the 'beat rows' removed and it should convert fine.