Sean Meighan
Welcome => Do You Need Help? Post it here => Topic started by: Onesmoothhead on November 26, 2015, 07:29:37 PM
-
Hello all, I am struggling with building the model. Example: channel 1 green, channel 2 red, channel 3 white. I have multiple models and none seem to work in full. I now have custom models for each and only my red work. When I look at the node under each channel in the sequence the red shows on, but the green shows off and white is showing off. All were set to be on for the time period. Any ideas or help would be great. Kevin
-
Are they placed so that the ones not showing are overlapping each other? The other issue I have is copying I get the colors off or the channels numbers messed up.
-
I do not have them over lapping and I have only the 3 channels testing. Here is a screen shot of the sequence.
-
Something about the red colors on them I think is the issue. Drop a white on effect on them instead of red.
-
Jeffl, thank you so very much. I changed them to white and my test work. I think I am now heading in the correct direction. I can not thank you enough.
-
Just passing on what I received. I would also try a color that matches the model color. That also works but a color other than those two combinations doesn't.