Sean Meighan

Software => Nutcracker Effects => Topic started by: jeffl on November 28, 2015, 06:57:28 PM

Title: Fan doesn't cover all objects in model group - SOLVED
Post by: jeffl on November 28, 2015, 06:57:28 PM

I'm trying to use a fan effect and it's covering 95% of the model group but leaving of part of the right side.  I'm using other effects in the same sequence that are covering all parts of the model group.  Are there things I can check to see why this could be happening?

Thanks

Title: Re: Fan doesn't cover all objects in model group
Post by: jnealand on November 28, 2015, 08:52:48 PM

I can't answer your question except to tell you that a search on "minimal grid" might bring up what needs to be changed.  I've read about it, but never been affected by it.  Good luck

Title: Re: Fan doesn't cover all objects in model group - SOLVED
Post by: jeffl on November 28, 2015, 09:08:48 PM

Thanks!  That's what I needed.  There is a "Layout Mode" on the "Model Groups" window and mine was set to "Minimal Grid".  I changed it to "Grid as Per Preview" and rendered and it's now as expected.