Sean Meighan

Software => Nutcracker Effects => Topic started by: Dl20415 on July 03, 2014, 06:26:05 AM

Title: Colors not right in Sequences
Post by: Dl20415 on July 03, 2014, 06:26:05 AM
In the sequences that I have made, when I run them to my mega tree, the patterns seem correct however the colors are wrong. They are all multicolored. In areas that should be a solid colored tree, I get all different colors. My model is setup correctly, could it be something in the main setup.


Sent from my iPad using Tapatalk
Title: Re: Colors not right in Sequences
Post by: MrChristmas2000 on July 03, 2014, 08:02:20 AM
It would help if you posted the type of lights and equipment you are using.

Did you use the 'Test' function in xLights to see if your lights were responding as you would expect?
Title: Re: Colors not right in Sequences
Post by: Dl20415 on July 03, 2014, 08:32:09 AM
I have 8 LOR 2 strand controllers with 50 pixels on each, for a total of 16 strands. It is on 2 hi speed 485 adapters on com ports 4 and 5. I have it on setup as 1200 channels on each port.


Sent from my iPad using Tapatalk HD
Title: Re: Colors not right in Sequences
Post by: roverdish on July 03, 2014, 09:19:22 AM
I heard of a similar issue being resolved with a "raw" color setting. I will post more if I find out more.

http://forums.lightorama.com/index.php?/topic/20794-incorrect-colors-when-using-dmx-with-lor/?hl=%2Bincorrect+%2Bcolors

See if this helps
Title: Re: Colors not right in Sequences
Post by: Dl20415 on July 03, 2014, 10:22:44 AM
When I run the sequences from Wowlights, everything is perfect!


Sent from my iPad using Tapatalk HD
Title: Re: Colors not right in Sequences
Post by: roverdish on July 03, 2014, 12:25:52 PM
Yes I think it is an LOR settings issue.

Title: Re: Colors not right in Sequences
Post by: Dl20415 on July 03, 2014, 12:41:21 PM
One thing I did notice is that I can't play sequences to my tree through NC. That is why I suspect my setup on the first setup page.


Sent from my iPad using Tapatalk HD