Sean Meighan

Software => xLights Convert => Topic started by: K-State Fan on January 06, 2016, 07:06:05 AM

Title: LOR to fseq
Post by: K-State Fan on January 06, 2016, 07:06:05 AM

I am starting to learn how to convert my LOR sequences to fseq so I can use FPP for my show next year.  I made a simple LOR sequence to test first that included 16 lor channels then 100 RGB channels.  When I converted it the file the lor channels converted correctly but the RGB channels started ant channel 193 instead of 17 like I was expecting.  Why did it do this?

Is there a wa to look at the data in a fseq file?   

Title: Re: LOR to fseq
Post by: Gilrock on January 06, 2016, 07:13:08 AM

It depends on what you have on your Setup tab.  By the way just check the show verbose channel mapping box and then when it converts read the messages to see how things are being mapped.

Title: Re: LOR to fseq
Post by: K-State Fan on January 06, 2016, 08:56:31 AM

I had not changed my setup.

Thanks

Title: Re: LOR to fseq
Post by: Gilrock on January 06, 2016, 09:09:09 AM

Ok so it was wrong from the beginning.

Title: Re: LOR to fseq
Post by: gerry on January 07, 2016, 12:44:10 PM

Hi,

The manual has a chapter at the end on converting from LOR that may help.
Also the Wiki has a few videos for LOR users and channel setup that Steve , Clyde , Andy have done