Sean Meighan
Software => Xlights Setup => Topic started by: bravado67 on April 30, 2016, 07:01:06 PM
-
Sneak peak at my F16V2-R
https://www.youtube.com/watch?v=ZcJIYd_pW7k (https://www.youtube.com/watch?v=ZcJIYd_pW7k)
Ron
-
How did you attach your f16 to the mounting plate and the case. Did you use standoffs? What screws did you use for the plate to the case?
-
How did you attach your f16 to the mounting plate and the case. Did you use standoffs? What screws did you use for the plate to the case?
I have standoffs being delivered next week so I used a Pan Head Phillips Screw and nylon washer for the set up in the video. Once I get the nylon standoffs I will switch it out.
For the board layout just flip the bird. I mean.... turn the falcon upside down and mount F16V2-R at the top and the expansion board at the bottom. Keep in mind this configuration is for the smaller holes on the plate. Both controllers fit exactly on the edges top and bottom with the fuses at the bottom.
Ron
-
This is what I ordered to mount the board to the plate bought a test kit first and these were sizes that I found worked best (http://uploads.tapatalk-cdn.com/20160501/f6ffaad2c3caec52766aaf148eeaa425.jpg)
Sent from my iPhone using Tapatalk
-
This is what I ordered to mount the board to the plate bought a test kit first and these were sizes that I found worked best (http://uploads.tapatalk-cdn.com/20160501/f6ffaad2c3caec52766aaf148eeaa425.jpg)
Sent from my iPhone using Tapatalk
That's exactly what I ordered.
Sent from my SM-G920V using Tapatalk
-
This is what I ordered to mount the board to the plate bought a test kit first and these were sizes that I found worked best (http://uploads.tapatalk-cdn.com/20160501/f6ffaad2c3caec52766aaf148eeaa425.jpg)
Sent from my iPhone using Tapatalk
That's exactly what I ordered.
Sent from my SM-G920V using Tapatalk
I got em all in today. Love prime and Sunday delivery from usps lol. I got some m4s also. But had to cut em down a bit for power supplies no also had issues with the holes not quite lining up for the power supplies.
-
This is what I ordered to mount the board to the plate bought a test kit first and these were sizes that I found worked best (http://uploads.tapatalk-cdn.com/20160501/f6ffaad2c3caec52766aaf148eeaa425.jpg)
Sent from my iPhone using Tapatalk
That's exactly what I ordered.
Sent from my SM-G920V using Tapatalk
I got em all in today. Love prime and Sunday delivery from usps lol. I got some m4s also. But had to cut em down a bit for power supplies no also had issues with the holes not quite lining up for the power supplies.
All of my Power Supplies fit perfectly with the plates from HC. Looks like I'll be painting 6 of the cg-1500s to blend in with my white stucco. I really thought I was done with the spray paint on all my 1/2" pvc for pixel mounting. LOL
Ron
-
Hey can you guys quote that huge picture again...I missed it the first 4 times.
-
Hey can you guys quote that huge picture again...I missed it the first 4 times.
Gil, just right click on it and make it your screen background. 8)
Sent from my SM-G920V using Tapatalk
-
This is what I ordered to mount the board to the plate bought a test kit first and these were sizes that I found worked best (http://uploads.tapatalk-cdn.com/20160501/f6ffaad2c3caec52766aaf148eeaa425.jpg)
Sent from my iPhone using Tapatalk
I'm sure we can Gil :)
-
This is what I ordered to mount the board to the plate bought a test kit first and these were sizes that I found worked best (http://uploads.tapatalk-cdn.com/20160501/f6ffaad2c3caec52766aaf148eeaa425.jpg)
Sent from my iPhone using Tapatalk
I'm sure we can Gil :)
Eric,
The price is really good too! LOL
Ron