Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: JasonPortwood on June 11, 2016, 07:51:21 PM

Title: Help with a spiral
Post by: JasonPortwood on June 11, 2016, 07:51:21 PM

I have a custom element that is basically a spiral with two pixels on each spoke - 16 spokes in all.  How do you group the pixels on each spoke so each are the same color/effect?  I know some controllers can group pixels but mine doesn't have that feature.

Thank you,

Jason

Title: Re: Help with a spiral
Post by: Gilrock on June 11, 2016, 11:46:32 PM

You'd need to create another model for each spoke.  We've talked about a possible feature to create virtual sub models.  If we could implement that sometime it would be the way to go for this.

Title: Re: Help with a spiral
Post by: JasonPortwood on June 12, 2016, 08:36:50 AM

Thank you for the answer to that.  As well as the info on a possible future for it.  Sounds interesting.

Title: Re: Help with a spiral
Post by: jonnyb44 on June 27, 2016, 05:06:59 PM

I used a matrix for a spinner so I create a vertical matrix in your case 2 high and 16 wide. Then if you do a curtain or single line it will change each spoke as it chases accross model


Sent from my iPhone using Tapatalk