Sean Meighan

Hardware => General hardware => Topic started by: logandc99 on July 03, 2016, 03:59:00 PM

Title: Enclosures
Post by: logandc99 on July 03, 2016, 03:59:00 PM
Just a quick question to those in the US of A. What store chain sells good enclosures in the US. I am heading to Hawaii which maybe more limited on choice, not sure, but would like to try and grab a couple while there as they cost a fortune here in NZ.


Sent from my iPhone using Tapatalk
Title: Re: Enclosures
Post by: Phrog30 on July 03, 2016, 04:20:09 PM
A lot of guys are using enclosures from bud industries (search amazon) and unconventional enclosures, like toolboxes and ammo cans. Just giving you a few more choices.

James

Sent from my SM-G900V using Tapatalk

Title: Re: Enclosures
Post by: t.jo13t on July 03, 2016, 05:44:32 PM
I have used radient holidays and creative lighting displays. For your general type enclosures. (Cg 500, 1000, and 1500) both places have good prices and great customer support.

Joe
Title: Re: Enclosures
Post by: logandc99 on July 03, 2016, 09:43:12 PM
Ok thanks. I'll keep those suggestions in mind
Cheers
Logan
Title: Re: Enclosures
Post by: jnealand on July 04, 2016, 07:41:36 AM
I still like the marine battery boxes.
Title: Re: Enclosures
Post by: Greg.Ca on July 11, 2016, 04:58:16 PM
If you want the best enclosures, use Hoffman boxes. Sold by Grainger and Allied electronics here in America. Very expensive  but I primarily buy them used from ebay. Way, Way Way cheaper. Hoffman boxes are used primarily by Industrial facilities and municipalities. I work at a municipality and we use 100% Hoffman enclosures as they are nema 4 rated. No cheap plastic is ever used. 100% very rugged steel. I wouldn't and don't use anything but Hoffman boxes. The big negative is that they are HEAVY and when loaded with numerous power supplies, it takes two men to lift, but they will protect your electronics to the nth degree. --Greg--

http://www.pentairprotect.com/hoffman
Title: Re: Enclosures
Post by: Phrog30 on July 11, 2016, 05:12:49 PM
If you want the best enclosures, use Hoffman boxes. Sold by Grainger and Allied electronics here in America. Very expensive  but I primarily buy them used from ebay. Way, Way Way cheaper. Hoffman boxes are used primarily by Industrial facilities and municipalities. I work at a municipality and we use 100% Hoffman enclosures as they are nema 4 rated. No cheap plastic is ever used. 100% very rugged steel. I wouldn't and don't use anything but Hoffman boxes. The big negative is that they are HEAVY and when loaded with numerous power supplies, it takes two men to lift, but they will protect your electronics to the nth degree. --Greg--

http://www.pentairprotect.com/hoffman
If you are going to use Hoffman style enclosures then Saginaw is the better choice, similar construction but a lot cheaper. Personally, both are way overkill for this hobby, but what ever you like I guess.

James

Sent from my SM-G900V using Tapatalk

Title: Re: Enclosures
Post by: babybear on July 11, 2016, 07:53:15 PM
Sometimes you can think outside the box.... No pun intended LOL  Here is a hammer drill box gutted and then fitted with a 36 channel dumb controller, it runs my gifts boxes under my mega tree.