Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: smoothsa on November 02, 2016, 10:17:30 PM

Title: DMX RGB Floods
Post by: smoothsa on November 02, 2016, 10:17:30 PM

How should I set up my DMX RGB Flood Lights, should I use the DMX model or something else. And, if I use the DMX model how do I get the lights to change. Do I have to use the DMX effects or will it work with any of the effects.
Thanks in advance.
Skipper

Title: Re: DMX RGB Floods
Post by: Gilrock on November 02, 2016, 10:30:00 PM

Don't use the DMX model for flood lights...it's meant for lights that have pan and tilt motors.

Title: Re: DMX RGB Floods
Post by: markrvp on November 03, 2016, 08:20:07 AM

Use the single line model and set the model to 1 node.  To make it show up in your display better, use a pixel size of 180, pixel style is blended circle, and you can adjust the transparency as well to mimic the light fall-off.  See image attached.

Title: Re: DMX RGB Floods
Post by: Gilrock on November 03, 2016, 09:00:43 AM

You can use more than 1 node to create a model with multiple flood lights.  Makes it easier to sequence effects to all floods at once.

Title: Re: DMX RGB Floods
Post by: smoothsa on November 03, 2016, 05:55:03 PM

Thank you.