Sean Meighan

General => The Water Cooler => Topic started by: THurrle on October 05, 2014, 08:00:34 AM

Title: Pixel spacing
Post by: THurrle on October 05, 2014, 08:00:34 AM
I am nearly ready to construct my pixel tree. I have some sequences with pictures and one with a video. My pixels are 4 inch spacing. I did not give this a thought when figuring the height and doing the tree. Do I need to reduce the spacing and make the tree shorter to get good pictures and the video to look good or will this work.

The tree is a 180 degree tree 50 pixels high and 30 wide. First year with pixels.
Thanks for any input on this
Terry
Title: Re: Pixel spacing
Post by: Lights On Fifth on October 05, 2014, 08:35:46 AM
Terry the closer the pixels the better the pictures, when I ordered my pixels they came with 4 inch spacing, when I mounted them into the Pvc I drilled my holes at 3 inch spacing, you can go smaller than that if you like I think it becomes a preference, remember the smaller you go the shorter your tree, at 3 inch spacing my tree is roughly 12 feet in height.
Title: Re: Pixel spacing
Post by: THurrle on October 05, 2014, 12:53:38 PM
Don,
Thanks. I think I will go with 3 inch then. Maybe next year I can get more pixels and make it taller. I think my tree was 16 feet last year with led lights so it should look ok at 12 feet.  I want it to show the pics. Mounting them with the strips James over at DIYC sold.
Terry
Title: Re: Pixel spacing
Post by: JonB256 on October 05, 2014, 03:48:21 PM
Viewing distance is critical, too. If your tree will be 60 to 80 feet from the normal viewing spot, then 4 inches would be fine. 

If closer, then a 3 inch pitch is good.
Title: Re: Pixel spacing
Post by: THurrle on October 05, 2014, 04:44:25 PM
Thanks Jon. It is probably 30 feet from the viewing area.