Sean Meighan
Welcome => Do You Need Help? Post it here => Topic started by: aERonAUtical1996 on December 06, 2016, 02:18:36 PM
-
It was my impression that the VU Meter, Timing Event Color would change color, based on pallet, of the element on each timing mark.
When I drop the VU meter onto the element, I basically get white across the entire effect. I have a timing track generated from the Beats. Applied the VU meter, set to Timing Event Color with Beats as the timing track. 3 colors selected for the color.
Does not matter what color I chose... it is all white.
What am I doing wrong?
-
Follow up... if I select a different timing track, then it works as expected. Does not work for the generated Beats timing track for some reason.
-
Which brings up the question what timing track would be used for final render?
Sent from my Nexus 6P using Tapatalk
-
If the question is to me... I was assuming I could use the generated beats track and that is what I was targeting. In this instance, I was able to create timing marks on another timing track duplicating the generated one. The period of time for this sequence where I wanted to do this was 7 seconds so it wasn't too bad to do it manually.