Sean Meighan

Software => Xlights Setup => Topic started by: RobertB on October 18, 2014, 05:50:16 AM

Title: How do I do this?
Post by: RobertB on October 18, 2014, 05:50:16 AM

I have LOR controllers and dmx controllers plus e682 controllers.
I am running a projector in my show along with a new RDS transmitter.
I know how to run the scripts to turn the projector on / off and also for the RDS transmitter to send its text through LOR...but not sure what to do on xLights.  Is it even possible to run scripts through xLights? 

Title: Re: How do I do this?
Post by: sean on October 22, 2014, 04:03:31 PM

yes, you can run scripts from xlights
I didnt write teh code but you go to Playlist , Custom scripts. If you were looking at a playlist when you do this you will see a basic language script come uo

Title: Re: How do I do this?
Post by: RobertB on October 22, 2014, 08:47:49 PM

Guess I am using the wrong syntax. Guess it would be a Windows Command file. Like for instance I use a .bin and .bat file to turn my projector on and off. Can xLights do this?

Title: Re: How do I do this?
Post by: DDameron on October 23, 2014, 07:46:53 PM

If you search on diylightanimation for Xlights 2011c, there is a small note on using a custom script in Xlights (it's #5)... I use it to run a .bat file to change my scrolling led sign (shows song now playing and artist) and send RDS data... This is what #5 says...

There is now an EXEC command available when using scripts. This runs an operating system command. So if you want to write the name of the currently playing sequence to a text file, select Playlist > Custom Script from the xScheduler menu. Then you can do something like on line 225:

220 PRINT "Playing:",ITEMNAME$(NextItem)
225 EXEC "CMD /C ECHO " + ITEMNAME$(NextItem) + " >c:\nowplaying.txt"
230 PLAYITEM NextItem

I can attach what I'm using if you need more info... Hope this helps  :)
Dan

Title: Re: How do I do this?
Post by: RobertB on October 26, 2014, 10:28:48 AM

Quote from: DDameron on October 23, 2014, 07:46:53 PM

If you search on diylightanimation for Xlights 2011c, there is a small note on using a custom script in Xlights (it's #5)... I use it to run a .bat file to change my scrolling led sign (shows song now playing and artist) and send RDS data... This is what #5 says...

There is now an EXEC command available when using scripts. This runs an operating system command. So if you want to write the name of the currently playing sequence to a text file, select Playlist > Custom Script from the xScheduler menu. Then you can do something like on line 225:

220 PRINT "Playing:",ITEMNAME$(NextItem)
225 EXEC "CMD /C ECHO " + ITEMNAME$(NextItem) + " >c:\nowplaying.txt"
230 PLAYITEM NextItem

I can attach what I'm using if you need more info... Hope this helps  :)
Dan

Hey Dan,
I will have to try this when I get home. I am out of town for a few days.
I can't find the thread on that forum. Can you send me a direct link to that thread?
Thanks
Robert

Title: Re: How do I do this?
Post by: DDameron on October 26, 2014, 08:27:49 PM

Hi, Ken...

See if this works... You may need to copy and paste in your browser...

http://diylightanimation.com/index.php?topic=6622.0

I think you need to be registered to view, but not sure about that  :)

Dan

Title: Re: How do I do this?
Post by: RobertB on October 27, 2014, 03:18:26 PM

Yes that worked Dan. Still out of town so can't test this.
For the scripts. Can I set those to run just like songs? In other words run a script to turn the projector on at the first and then at the end one to turn off the projector?

Again a newbie at this.

Title: Re: How do I do this?
Post by: RobertB on November 02, 2014, 05:53:17 AM

Ok,
Here is a link to what I need to do with my projector;
http://doityourselfchristmas.com/forums/showthread.php?26645-How-to-turn-on-projector-remotely/page3
Look to post #27 for the exact post with the .bat and .bin file I will need to run.
So if I use xLights to run my show, I will need to run this .bat and .bin file. How do I do this with xLights?