Sean Meighan

Software => General Software => Topic started by: charlie-68 on March 15, 2017, 10:12:29 AM

Title: DMX question
Post by: charlie-68 on March 15, 2017, 10:12:29 AM

I'm having trouble in setting up three dumb controllers. All my lights are e1-31 rgb nodes, and I'm coming off the controller with rs-485 to two dumb controllers, and a Velleman k8072 dmx relay. My dumb controllers one is set to channel 1 second one set to channel 4 and the relay is set to channel 7. Is my channel settings OK. Thanks  Charlie J.

Title: Re: DMX question
Post by: charlie-68 on March 16, 2017, 08:08:53 AM

I solved my problem. there was a numbering conflict and I had to renumber the controllers. Charlie J.