Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: Vaughan on May 11, 2017, 08:00:48 AM

Title: best/proper way to include sub-models into groups, if possible
Post by: Vaughan on May 11, 2017, 08:00:48 AM

Setup... I have 8 matrix models used along the verticals of the house (on the corners and columns).  Each model is 5 vertical strands wide... I would like to use strand #3 (center) of each model as the only vertical strand to represent that portion of the whole house outline.  Issue, I can easily use sub-models (or just strand #3) to sequence individually, however tedious and inefficient.  Is it possible, and if so how to accomplish, grouping only the center strands of all 8 vertical matrix models together?  At that point I should be able to group the verticals with the roof line for a whole house outline... thanks much for assistance.

Title: Re: best/proper way to include sub-models into groups, if possible
Post by: Gilrock on May 11, 2017, 08:08:24 AM

Aren't sub-models available as group members?

Title: Re: best/proper way to include sub-models into groups, if possible
Post by: Vaughan on May 11, 2017, 08:37:34 AM

Thx Gil... they do in 2017 (was still using 2016)... sorry, I should have checked the latest version first (rookie mistake)... as always, thanks for your quick response and assistance.  I'll make the version switch today -Martin