Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: karljohnson33 on May 14, 2017, 06:17:50 PM

Title: RGB Matrix Color Question
Post by: karljohnson33 on May 14, 2017, 06:17:50 PM

I'm having trouble getting the correct colors on my matrix. I'm using xlights with an e682 controller. I have 16 strands of 50 pixels. When I test via the controller's page, the colors are all correct. However, when I output colors from xlights, each universe is different. I attached a picture where the matrix should show all red. Universe 1 is red, universe 2 is green, 3 is blue, etc. Any advice?

Title: Re: RGB Matrix Color Question
Post by: MikeKrebs on May 14, 2017, 07:57:08 PM

Or appears a mismatch between what a universe is.  One definition is 510 channels and one is 512 channels.  Check your controller and xlights and adjust as needed.

Title: Re: RGB Matrix Color Question
Post by: babybear on May 14, 2017, 08:08:25 PM

E682 controllers are only 510 channels per universe if you are set in xlights to 512 that will defiantly throw your colors off 

Title: Re: RGB Matrix Color Question
Post by: karljohnson33 on May 14, 2017, 08:16:23 PM

Good call fellas! Just changed the channels per universe to 510 and it works like a charm. Thanks!