Sean Meighan

Software => Xlights Setup => Topic started by: comicrcc on October 22, 2017, 04:00:08 PM

Title: How to setup a Pixeyhead controller in Xlights
Post by: comicrcc on October 22, 2017, 04:00:08 PM

I have a pixeyhead with a test string of 5 pixels and the Xbee Pro receiver.  I am using COM4 57600 for transmission.  I have pictures of the setup.  The pixeyhead is the same as a Renard PX-1 except less pixels.  Same 16F1825 PX-1 program.  When I run a sequence all 5 do the same thing.  If I send a sequence to node 1 all do the same.  If I send to node 2 - 5 no lights.   Acting like 1 node with 5 pixels.  I have used the PX-1 before with no issue.  The only difference here is the Xbee pro link.  I know the Xbee's are ok as they work on other types of controllers I have.  Any help would be great.  Thanks

Title: Re: How to setup a Pixeyhead controller in Xlights
Post by: Gilrock on October 23, 2017, 07:34:58 AM

Don't see anything wrong in the xLights setup.