Sean Meighan
Welcome => Do You Need Help? Post it here => Topic started by: sulrich on November 21, 2017, 06:00:55 AM
-
(xLights 2017.37)
Good Morning Folks, Last night i was updating my controllers and channels and see a discrepancy between the "Export Models" csv file and what the setup tab reflects.. I have don this before but never seen this... Why do i think its an issue, i have 3 consecutive models, all identical. first model starts on the right channel and ends on the right channel. Number 2 starts on the right channel, but ends with an extra 12 channels. model 1 has 9 universes,One to Eight at 512, and entry nine at 62. model 2 setup identical, 8@512, and 1@62..but it ends with an extra 12 channels.
Completely baffled to where these extra channels come from?????
-
Just pick one model that's wrong and show screenshots of everything involved with its channel setup in both xLights and the controller.
-
so if you look there are 3 identical models, MidTree1,2,3, each has 2 candy canes, quantity of channels are the same, side by side, but the setup page reflects midtree2, star, and 2 candy canes starts correct, but ends 12 channels to many any insight is appreciated
-
Check your start channel assignment for lg_candycane_03. It's showing as 31840 when it should be 31852.
-
Check your start channel assignment for lg_candycane_03. It's showing as 31840 when it should be 31852.
Gill,
Thank you, a second set of eyes sees everything!
I stared at those numbers and had check for overlapping but didnt see it.
Have a Happy Thanksgiving!
Thanks again,
Steve
-
So I take it when you checked for overlapping you didn't use our built-in feature Tools -> Check Sequence. Now there are times when overlaps are on purpose so its only a warning.
-
So I take it when you checked for overlapping you didn't use our built-in feature Tools -> Check Sequence. Now there are times when overlaps are on purpose so its only a warning.
I could have swore that it was on when i ran through the channels.
I know that it found a few overlaps with the check box.
Apologies for my oversight, but i'm extremely thankful for your insight.