Sean Meighan

Software => Bugs in xLights/Nutcracker => Topic started by: vwbugjps on November 29, 2017, 10:00:39 PM

Title: xSchedule Problem?
Post by: vwbugjps on November 29, 2017, 10:00:39 PM

I’m running a xlights show using two matrix s on two different light controllers.  The matrix s  test and display OK in both test mode and Sequencer mode but when I when using the xSchedule (Version 2017.33 - 64 bit) only the first matrix is displayed and not the second. Any ideas what I may be doing wrong or missing.

Thanks All,
Steve

Title: Re: xSchedule Problem?
Post by: keithsw1111 on November 30, 2017, 01:45:08 AM

First move to .38. Then run check schedule.

Title: Re: xSchedule Problem?
Post by: vwbugjps on November 30, 2017, 05:16:21 PM

Problem solved. In xLights 2016 the scheduler was installed inside the main application,  In xLights 2017 the scheduler is  independent from the main application.  My Xschedule 2017 was not pointing to my show folder. Once I configured  xSchedule to see the show folder, it solved my problems. xlights and xschedule need to match if you want the same show results