Sean Meighan

Software => Bugs in xLights/Nutcracker => Topic started by: jjBrisvegas on December 03, 2017, 08:12:04 PM

Title: xSchedule override volume
Post by: jjBrisvegas on December 03, 2017, 08:12:04 PM

I have been doing some schedule testing and had need to override some audio track volumes.
It appears that the override function is not working as I set one down to near minimum and it had no affect on he output (or am I doing something really wrong);

Title: Re: xSchedule override volume
Post by: Boof63 on December 04, 2017, 05:22:21 AM

Not sure, but if running from your computer just drop the sound on the audio jack that you are using, ( I had reverse, too soft and couldn’t work out why for awhile DOH!!)
Cheers Boof63

Title: Re: xSchedule override volume
Post by: jjBrisvegas on December 04, 2017, 06:02:02 PM

Thanks Boof but that won't help - 3 tracks are different levels hence the override.
When time allows I will normalise them with an external package but was just mentioning this for the developers...

Title: Re: xSchedule override volume
Post by: keithsw1111 on December 04, 2017, 11:57:31 PM

I have looked and tested the override and as best I can tell it works perfectly. It is entirely possible the volume control does not respond linearly but it definitely works.

Title: Re: xSchedule override volume
Post by: jjBrisvegas on December 05, 2017, 09:33:29 PM

Thanks Keith,

Went back to the drawing board - turns out it is because pre-loading.  Remove the fast start and all good thanks - should have known :-/

Title: Re: xSchedule override volume
Post by: keithsw1111 on December 07, 2017, 03:06:00 AM

This should be fixed in .41.

Title: Re: xSchedule override volume
Post by: jjBrisvegas on December 07, 2017, 02:36:28 PM

Thanks Keith   :D