Sean Meighan
Software => Bugs in xLights/Nutcracker => Topic started by: CLSeeb on December 04, 2017, 07:22:05 PM
-
Need help troubleshooting my problem, thank you in advanced for taking your time to read. I just ran my show for the first time today with xSchedule version .39. Everything ran completely smooth besides this one error. There is one controller that is experiencing a delay from the rest of the sequence. Ex. a sequence is running and every model connected to the controller is having a 10ish second long delay. The other controllers are models are running with music just fine. Some helpful info maybe, The lights im having problems with are the only rgb "dumb" lights im running in the show everything else is smart rgb pixels.
troubleshooting ive done so far:
I ran my sequences with the xlights sequencing program just using output to lights on and there is no delay so the error is occurring when transferring the sequences to the xSchedule program.
I created a playlist with just one musical sequence in it that i knew was running properly in xLights but it still experienced a delay when running it in xSchedule.
Updated xSchedule to V .39 and ran a check sequences, the file cameback with 0 errors.
Dont know if this will help since i dont think it is a hardware problem but just incase you need it.
Controllers im using are from holidaycoro:
The one with the problem: http://www.holidaycoro.com/27-Channel-DMX-Controller-for-RGB-Lights-25-Amps-p/25.htm
The other ones that are working: http://www.holidaycoro.com/AlphaPix-4-V3-RGB-Pixel-Controller-p/722-v3.htm
Any thoughts on why this might happen? thank you for reading and any troubleshooting advice will help.