Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: magish01 on August 07, 2018, 08:33:07 PM

Title: Dumb RGB not Modeling in xLights
Post by: magish01 on August 07, 2018, 08:33:07 PM

I am setting up my layout in xLights.  i have a CMB16 dumb pixel unit.  I have tried both single strand and custom models to get the string to show the 3 channels.  Tried both 3 RGB and RGB with one node.  Only the  first channel will show (Strand 1 Node 1).  The CMB is set up as a LOR unit.  Does it need to be set as DMX instead for the unit to model the RGB channels.  The layout shows the model uses 3 channels but only shows Node 1 and is white.  when the sequence is played, the model shows white but nothing else.  Tried using Wash but no go.
Any help would be greatly appreciated.

Title: Re: Dumb RGB not Modeling in xLights
Post by: magish01 on August 07, 2018, 08:38:37 PM

Attached is the zip for the problem

Title: Re: Dumb RGB not Modeling in xLights
Post by: magish01 on August 08, 2018, 07:21:29 AM

Solved my own problem.  Helps when you get some sleep after too much time at the computer.