Sean Meighan

Software => Bugs in xLights/Nutcracker => Topic started by: Centauri61032 on December 08, 2018, 03:37:58 PM

Title: 53 problem with schedule starting based on priority
Post by: Centauri61032 on December 08, 2018, 03:37:58 PM

I loaded 53 to check the name corruption issue, and my show didn't start.
I have one playlist running 24/7 with just music.
And my show starts at 4:30 with a higher priority.
Up through 51, the higher priority show would kick off at 4:30.
On version 53, it did not. The lower priority 24/7 playlist kept going.

Title: Re: 53 problem with schedule starting based on priority
Post by: keithsw1111 on December 08, 2018, 05:35:52 PM

There is a quirk there. I will push out 54 with the fix once I test it with my show.


Sent from my iPhone using Tapatalk

Title: Re: 53 problem with schedule starting based on priority
Post by: keithsw1111 on December 08, 2018, 11:25:24 PM

54 is up


Sent from my iPhone using Tapatalk

Title: Re: 53 problem with schedule starting based on priority
Post by: mmais on December 09, 2018, 05:23:38 AM

Quote from: keithsw1111 on December 08, 2018, 11:25:24 PM

54 is up

Just tried to download 7:30 AM & says Failed-No File
Mike

Title: Re: 53 problem with schedule starting based on priority
Post by: Centauri61032 on December 09, 2018, 09:22:03 AM

Well, 54 is a no go.
It runs for a while. Then just suddenly disappears.
Log attached, hopefully

Title: Re: 53 problem with schedule starting based on priority
Post by: Centauri61032 on December 10, 2018, 03:43:42 PM

OK, so far, 55 is doing great.
I have had it running for about 10 hours now.
No file name corruptions. No crashes.
And the schedule kicked off based on priority as it should.
Kudos to Keith!