Sean Meighan
Software => LOR => Topic started by: bobbert on November 29, 2014, 02:04:28 PM
-
What and how to set up the lor boxes to run in xlights(DMX mode). Have done the cross cable at the first box but nothing plays from xlights. Have 5 LOR boxes and 1 E1.31 running rgb mega tree which runs fine.
Any help on this would be very helpful for time is running out.
-
In the Xlights setup tab, you need to add the DMX network to your e131 network. For DMX, it asks for port and last channel. I know this part, but what I don't know is if you have to do something in your LOR sequences before you convert them in XL. I have that question on another post.
-
Make sure to look at DMX-DOC.pdf on the LOR site.