Sean Meighan

Software => Xlights Test => Topic started by: kazdeb on December 01, 2019, 07:00:22 PM

Title: controller ip address changes during model setup
Post by: kazdeb on December 01, 2019, 07:00:22 PM

 I needed to do a new model description due to using a new photo to show new models to be incorporated into the display.  I am running a falcon f16v3, with ip # 192.168.1.111.
                                    Alpha pix 16  , with ip# 192.168.1.50.
                                    Alpha pix 4, with ip# 192.168.1.114
 When ever I try to define the model in Layout, xlights accepts the definition of 192.168.1.114, but the changes
the ip # to 192.168.1.50 which is the controller for the mega tree.  Even when the ip # is not changed, xlights
shows a conflict between the tree and the model being described (shed ouline).

Click on shed outline, no conflict with the tree.
Click on tree, shed outline is red indicating a conflict exists.

I am so confused, Please help!
 

Title: Re: controller ip address changes during model setup
Post by: keithsw1111 on December 01, 2019, 07:30:47 PM

Jump in zoom. They guys there will sort you out.