Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: MarkH on January 26, 2020, 06:54:40 AM

Title: 36" - 3ring Boscoyo download off centered in its buffer
Post by: MarkH on January 26, 2020, 06:54:40 AM

Today I finally figured out the buffer for this prop appears to be offset to the right. The handles are wide on the right and the center rotation handle is also offset. I tried another download today of the same prop and it too is offset. My other stars / props are not offset but centered. I am assuming the cell count can be changed to tighten up the right side. I open the node layout and there are 11 extra blank cells on the right side.
I clicked on the count of 95 across to change it to 84 with no success with the model both locked and unlocked. I assume I am doing something wrong.

Title: Re: 36" - 3ring Boscoyo download off centered in its buffer
Post by: MarkH on January 26, 2020, 09:04:10 AM

OK, I figured it out. I went to the models "Model Data" in the Layout properties. I change the horizontal number and it appears to be good.

Title: Re: 36" - 3ring Boscoyo download off centered in its buffer
Post by: Gilrock on January 26, 2020, 12:53:57 PM

Yeah the vendor download feature is setup so that the vendor is in control of those files and can update them between releases.