Sean Meighan

Hardware => Falcon Hardware => Topic started by: kk6ou on March 31, 2020, 07:19:44 PM

Title: F16V3 main board only limiting pixels to 682
Post by: kk6ou on March 31, 2020, 07:19:44 PM

I am trying to configure my F16V3 for a 1024 pixel matrix on one port.  I have 30 universes set in E131 screen all 510 size, addressing mode is Absolute.  When I try to set the port to 1024 pixels in the Port configuration it limits me to 682.  It only started this after I updated the firmware to 2.55.  Is this a bug and if so is there a work around?  Note:  There is no expansion board installed and Port Config is set to "Main Board Only".  Everything is saved and I have tried rebooting.
Thanks for advice,
Doug

Title: Re: F16V3 main board only limiting pixels to 682
Post by: kk6ou on March 31, 2020, 07:32:00 PM

As usual I kept fiddling.  I finally did another factory reset on it and it fixed the problem.  Hopefully this will help someone else.

Cheers!