Sean Meighan
Software => Bugs in xLights/Nutcracker => Topic started by: horathgar2000 on May 08, 2020, 04:54:17 PM
-
Hello,
When I try to upload output to my BBB with Octa-Scrolla Plus "4.0 FPP" for my led panels it enables the "Enable BBB String Cape". When this occurs it causes the homepage for the BBB to show.
###
Abnormal Conditions - May Cause Poor Performance
Could not initialize output type BBB48String. Check logs for details.
###
The only way to fix this so far is to manually disable it in the FPP software.
Could this be a problem in Xlights or is it a problem in the 4.0 FPP software?
I am currently running Xlights 2020.18 but this has been going on since 2020.12
For the controller it is set to Vendor: FPP Model: LED Panels
-
If your BBB is running in Remote mode you really don't need to define it in xlights. It's better to set your matrix channels as a NULL controller and just set your LED panels setting on the BBB.
-
The setup works fine for me but what i could see is that if someone sets up their controllers like the following and makes changes to their layout the Upload Output could be a headache.
Universe 1-20 Pixel Controller X
Universe 30-40 Pixel Controller Y
Universe 200 - 440 BBB with 20 P5 Panels.
In this setup with any changes to controller X or Y would change the channel numbers for the BBB Matrix. Requiring a new upload Input/Output from Xlights to make it match the rendered sequence.
-
I spoke with Keith and am going to send this over to FPP team.
Thanks all.
-
This was fixed in version 2020.19.