Sean Meighan

Hardware => Falcon Hardware => Topic started by: big_dog_501 on May 31, 2020, 10:08:53 AM

Title: DMX control of a U.King light with a F16v3 controller
Post by: big_dog_501 on May 31, 2020, 10:08:53 AM

Iam trying to connect a U'King LED Par Light 36 to a Falcon F16v3 controller to be run with xLights.
I have the F16v3 set up as the only controller using DMX port 3 at starting address 1025. 
I have an ethernet cable going thru a DMX adapter to the DMX cable input on the light.
The model is set up as a DMX floodlight with 7 channels.  It is set up to use start channel 1025.
I put the model into a sequence with control lights set on and I see no out put to the light.
Any ideas about what I am doing wrong?

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: keithsw1111 on May 31, 2020, 12:03:48 PM

Shutter set correctly?

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: big_dog_501 on May 31, 2020, 12:19:15 PM

Thanks for the reply. 
I have tried to set the shutter to channels 1,6,and 7. still no output

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: keithsw1111 on May 31, 2020, 12:54:06 PM

Jump in zoom. They will get you going.

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: big_dog_501 on May 31, 2020, 01:35:59 PM

First time Zoom user.  I have an account.  How do we get connected?

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: keithsw1111 on May 31, 2020, 02:04:07 PM

Click on the link on xlights.org or the help menu in xlights. Make sure you have a microphone.

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: big_dog_501 on June 01, 2020, 09:19:46 AM

At what time of day do these meetings usually run?

Title: Re: DMX control of a U.King light with a F16v3 controller
Post by: Gilrock on June 01, 2020, 09:31:58 AM

There are no organized meetings just log in and see if anyone there wants to help.