Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: raketyboom on November 08, 2020, 09:10:21 AM

Title: Port 1 and port 17 getting same signal
Post by: raketyboom on November 08, 2020, 09:10:21 AM

Running a Falcon F16v3 with one expansion card and xlights 2020.47.  I have a 512 universe size and 270 pixel star on port 1. On ports 2-27 each have 100 pixels on them for the mega tree.  Port 1 and port 17 seem to be getting the exact signal.  I have reset the controller to defaults, and even moved models around thinking it may be a model issue causing it but I still get the same result.  Port 1 and 17 display the same color/effect. I have looked to make sure channels do not cross and my universes seem correct. 

Has anyone else experienced this or have any suggestions?

Thanks all.

Title: Re: Port 1 and port 17 getting same signal
Post by: keithsw1111 on November 08, 2020, 11:02:21 AM

I suggest you jump into zoom and check with those guys your configuration. They will be in there all day today.