Sean Meighan

Sequences and Images => Paid Sequences => Topic started by: kimoto on July 29, 2021, 01:32:34 AM

Title: ARTNET Setting
Post by: kimoto on July 29, 2021, 01:32:34 AM

This is Kimoto in Japan.
I want to control DMX pixel lights from xLights using the ARTNET interface.

I am a beginner, so please tell me how to set it up.

I can connect to the ARTNET interface by entering the IP address.
Also, when I turn on the lights, the ARTNET interface responds as if it is getting a signal.

However, the DMX light does not light up.
This means that the DMX signal is not connected.

I've been trying for about a week now, but the situation hasn't changed at all.

I would like to know more about setting up xLights using the ARTNET interface.

(I'm using a translation tool)

Translated with www.DeepL.com/Translator (free version)

Title: Re: ARTNET Setting
Post by: keithsw1111 on July 29, 2021, 04:51:47 PM

Do you have the artnet universe correct?

Title: Re: ARTNET Setting
Post by: kimoto on July 29, 2021, 08:11:00 PM

Thanks for your reply, keithsw1111.
I think you are right about Artnet Universe.
I'm using MADRIX and it works fine.

As for the current situation
When I access the IP of the ARTNET interface, I can browse.
When I turn on the lamp with xLights, the data lamp of the interface is responding.
The lights connected by DMX cable keep giving me a no signal error.

I think there is a problem with my setup, but I can't seem to solve it...
(I'm using a translation tool)

Title: Re: ARTNET Setting
Post by: keithsw1111 on July 29, 2021, 08:56:14 PM

Maybe post a pic of your madrix and xlights configurations and we can see what does not match.

Title: Re: ARTNET Setting
Post by: kimoto on July 29, 2021, 10:06:27 PM

Thank you!
I'll take a picture and post it as soon as I can.

Title: Re: ARTNET Setting
Post by: kimoto on July 29, 2021, 10:27:11 PM

This is the MADRIX settings screen when the connection is properly established.
(https://www.1st-dt.com/wp-content/uploads/2021/07/MADRIX_artnet_setting1.png)
(https://www.1st-dt.com/wp-content/uploads/2021/07/MADRIX_dmx_setting.png)

This is my xLights configuration screen, which is not connected.
(https://www.1st-dt.com/wp-content/uploads/2021/07/xlights_artnet_setting.png)
(https://www.1st-dt.com/wp-content/uploads/2021/07/xlights_artnet_setting2.png)

I would appreciate your continued advice.

Title: Re: ARTNET Setting
Post by: keithsw1111 on July 29, 2021, 11:35:46 PM

Try setting your xlights artnet universe to 0. Not 1.

Title: Re: ARTNET Setting
Post by: kimoto on July 29, 2021, 11:56:51 PM

It recognized the DMX and lit up.
Thank you kindly!