Sean Meighan

Welcome => Do You Need Help? Post it here => Topic started by: pecora on August 26, 2021, 01:00:47 PM

Title: Polyline with multiple controllers and backwards mapping
Post by: pecora on August 26, 2021, 01:00:47 PM

I have a roof outline, polyline, that currently has 34 segments (or lines) in XLights. On these 34 segments there are 11 strands (ports used). These 11 strands are split up among 4 smart long range receivers (Hinkspix). I have 4 strands ( one for each receiver ) that I need the pixels to go backwards. With the dumb long range this is easy to set the port config to "reverse". I do not see this option for the smart receiver. On the "Polyline Model" there are options for individual start channels for each segment. This seems it could work for my configuration however how can I chose an individual segment or line to count / control pixels backwards ?

Title: Re: Polyline with multiple controllers and backwards mapping
Post by: Gilrock on August 26, 2021, 01:57:39 PM

Just draw those segments backwards.  Use a segment with 0 pixels to move the pen as I call it.