Sean Meighan

Software => Xlights Setup => Topic started by: Bill - PVL on November 08, 2021, 09:42:05 AM

Title: FPP / F16V3 and XLights
Post by: Bill - PVL on November 08, 2021, 09:42:05 AM

I have an FPP remote setup with my F16 plugged into the eth port....

FPP REMOTE  eth0 - 10.10.22.1 / 255.255.255.0 / blank gateway   wlan - 10.10.10.21 / 255.255.255.0  gw 10.10.10.1

f16 - 10.10.22.2 / 255.255.255.0 / gw 10.10.22.1

FPP Proxy is set with 10.10.22.2.   

XLIGHTS PC is at 10.10.10.11
PC is windows 10 and has a persistent route -  10.10.22.0 / 255.255.255.0  10.10.10.22 metric 1

Questions -

1.  in XLIGHTS when I do a discover controller should xlights find the f16 that is on the FPP remote?  It finds the FPP remote.

2.  Should I be using DDP or E1.31 for the controller and the FPP remote?

Title: Re: FPP / F16V3 and XLights
Post by: allknowing2012 on November 08, 2021, 10:05:13 AM

1. Not likely -- dont use discover .. just enter the IP for that and enter the FPP wifi ip in the fpp proxy property for controller.
2. If you are using 2.59 firmware for F16V3 or using V4 .. sure go with DDP.