Sean Meighan
Welcome => Do You Need Help? Post it here => Topic started by: Magig_xmas on June 04, 2024, 04:25:30 AM
-
im told to use a PAMP to get the effext simple single strand to look like breathing on a RCH 30 pixel
id like it to be full nodes breathing up and down
pleve me some infos like a Video if there is somthing on this ramping
thank you
-
What controller or sequencer are you using?
-
@ mike_:krebs
Does this matter at all m using 6 ESP8266 D1 Wemos shields on E131 via Xlights
The Showes work great and if i loose connection (( Never Happend ))
the internal playlist does take over with a Clever orgenised rest all six controller are resetting to the same Time
so it switches to Iternal playlist THIS is also Running 90% of the 2hour OnTime
-
It does matter in that different sequencers have different features available. If you were using a python script or had some weird controller that was using its own effects that would matter as well.
Not very good at sequencing but I tested a simple on effect in xLights and did one ramp up and then one ramp down. It looked good for breathing to me. Here is video that explains the on effect
https://www.youtube.com/watch?v=VygKUouKUHU
A Shockwave might give you the effect you are looking for. Here is a video on that:
https://www.youtube.com/watch?v=QWQ37CoI8js
On the prop I was testing, Fire looked good for breathing. It was irregular breathing but gave a nice up and down with subtle color change that reminded me of breathing.
-
Thank yoiu now i know where to go with the prop