1
Do You Need Help? Post it here / Re: openDMX at MAC Version
« on: January 14, 2016, 01:51:21 PM »
So, I tested it on the fast , but it does not go . I'll try to bring it to work.. give me a day
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Do You Need Help? Post it here / Re: openDMX at MAC Version
« on: January 14, 2016, 01:29:08 PM »
Yes, i can give it a try tomorrow .. and i will give you directly a feedback :-)
3
Do You Need Help? Post it here / openDMX at MAC Version
« on: January 14, 2016, 11:59:01 AM »
Hi there,
can someone explain, why the openDMX USB-Controller doesn´t exists in the MAC Version?
I have a usb2dmx Cable that work with xlights at Windows 7 (Parallels at Mac) with the openDMX Version.
I would like to actually directly work with the Mac Version, but i can´t find the openDMX Controller in xlights.
Someone uses the Mac version with OpenDMX ?Or has a hint for me?
Sven
can someone explain, why the openDMX USB-Controller doesn´t exists in the MAC Version?
I have a usb2dmx Cable that work with xlights at Windows 7 (Parallels at Mac) with the openDMX Version.
I would like to actually directly work with the Mac Version, but i can´t find the openDMX Controller in xlights.
Someone uses the Mac version with OpenDMX ?Or has a hint for me?
Sven
4
Do You Need Help? Post it here / Custom Model DIY Tree with single color led chains.
« on: January 09, 2016, 09:38:10 AM »
H there,
i will create DIY Trees, which 5 Single Color (blue, red, green, mixed and purple) LED chains has, each wound with 100 LEDs in 10 meters.
The Chains are wired at a 27 Channel DMX Controller.
With xLights i wil turn on and off the single chains per Tree.
Is it possible, to create a custom tree model? at the moment, i have no idea, how to make it :-(.
or must i create a custom model per tree and per chain?
Sven
i will create DIY Trees, which 5 Single Color (blue, red, green, mixed and purple) LED chains has, each wound with 100 LEDs in 10 meters.
The Chains are wired at a 27 Channel DMX Controller.
With xLights i wil turn on and off the single chains per Tree.
Is it possible, to create a custom tree model? at the moment, i have no idea, how to make it :-(.
or must i create a custom model per tree and per chain?
Sven
5
Do You Need Help? Post it here / Re: Matrix not displaying effects, just shows white pixels
« on: January 07, 2016, 03:05:53 AM »
Hi,
many thanks!!!
I try your file and it works.
Then i open the model -> dimming curves and the fields are empty .. then i didn´t press cancel but OK and this was messed up the state.
if i insert 1 at gamma and 0 at brightness again and press ok, the snowflake works fine.
So this could be the same problem as blakec has!
Maybe it´s a bug in the Programm, that the fields are empty?
I will rebuild the snowflake from Matt Johnson and therefor i need all the nodes ..
In the next step I will the stars and strokes Add as individual elements , so that they can be controlled individually or as a whole.
Just as Matt also makes it :-)
many thanks!!!
I try your file and it works.
Then i open the model -> dimming curves and the fields are empty .. then i didn´t press cancel but OK and this was messed up the state.
if i insert 1 at gamma and 0 at brightness again and press ok, the snowflake works fine.
So this could be the same problem as blakec has!
Maybe it´s a bug in the Programm, that the fields are empty?
I will rebuild the snowflake from Matt Johnson and therefor i need all the nodes ..
In the next step I will the stars and strokes Add as individual elements , so that they can be controlled individually or as a whole.
Just as Matt also makes it :-)
6
Do You Need Help? Post it here / Re: Matrix not displaying effects, just shows white pixels
« on: January 06, 2016, 12:46:17 PM »
Here are my files.. i hope someone can find my mistake.
Many Thanks!
Many Thanks!
7
Do You Need Help? Post it here / Re: Matrix not displaying effects, just shows white pixels
« on: January 06, 2016, 12:35:58 PM »
could it be, that a false network setup can be the problem? i delete the seand the preview shows a little bit better!
8
Do You Need Help? Post it here / Re: Matrix not displaying effects, just shows white pixels
« on: January 06, 2016, 10:53:53 AM »
Hi, i do what you say and ... nothing happens. the preview model shows always withe pixels!
Last week i try with an other model and i see the same problem.. don´t know why!
Its a fresh installed xlights.
Last week i try with an other model and i see the same problem.. don´t know why!
Its a fresh installed xlights.
9
Do You Need Help? Post it here / Re: Matrix not displaying effects, just shows white pixels
« on: January 05, 2016, 10:20:57 AM »
Screenshot is attached
10
Do You Need Help? Post it here / Re: Matrix not displaying effects, just shows white pixels
« on: January 04, 2016, 01:55:27 PM »
Hi there,
i have the same problem.
I create a custom model (snowflake) with 190 Pixels (rgb), then i create a new sequence (animation) and timings ("T").
if i hit a effect, nothing happend, if i move the effect to the timeline, the the pixels are shown "white" in the preview!
I use Nutcracker 4.3.00 (MAC Version)
Sven
from Germany
i have the same problem.
I create a custom model (snowflake) with 190 Pixels (rgb), then i create a new sequence (animation) and timings ("T").
if i hit a effect, nothing happend, if i move the effect to the timeline, the the pixels are shown "white" in the preview!
I use Nutcracker 4.3.00 (MAC Version)
Sven
from Germany
Pages: [1]