1
Xlights Setup / Re: Lag in 3D preview
« on: April 03, 2019, 04:12:45 PM »
I've never experienced this. Can you say a bit more about your hardware, xLights version, and OS?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Enhancement Requests / Re: Nodes in Custom models
« on: March 11, 2019, 05:06:02 PM »
Right Click -> Node Layout is the quickest way that I know of.
3
Bugs in xLights/Nutcracker / Re: Animated GIF causes fatal crash when used with 'Image' model (Linux)
« on: March 08, 2019, 04:03:24 PM »
I've only tried a few, but the ones I tried animate.
If you have a reasonable size that loads but doesn't animate, you'll have to share so that someone can try to reproduce.
Greg
If you have a reasonable size that loads but doesn't animate, you'll have to share so that someone can try to reproduce.
Greg
4
Bugs in xLights/Nutcracker / Re: Animated GIF causes fatal crash when used with 'Image' model (Linux)
« on: March 06, 2019, 04:35:02 PM »
Actually, can you
1) Are you compiling your self or using appImage
2) Share your house model
3) Share your animated image.
I just tested with 2019.15, complied myself on Uubuntu 18.04.02. I tested the animated image in the issue linked above and it worked fine.
Greg.
1) Are you compiling your self or using appImage
2) Share your house model
3) Share your animated image.
I just tested with 2019.15, complied myself on Uubuntu 18.04.02. I tested the animated image in the issue linked above and it worked fine.
Greg.
5
Bugs in xLights/Nutcracker / Re: Animated GIF causes fatal crash when used with 'Image' model (Linux)
« on: March 06, 2019, 04:18:12 PM »
For awareness, there is an open issue where animated gifs crash under linux.
https://github.com/smeighan/xLights/issues/1323
Greg
https://github.com/smeighan/xLights/issues/1323
Greg
6
Bugs in xLights/Nutcracker / Re: Crash 2019.15 random
« on: March 04, 2019, 06:37:27 PM »
I couldn't reproduce your problem using HEAD branch of xLights. Using the files form xLightsProblem-1. I tested the following.
1) Opened xLights
2) Opened your seuqnce
3) Added a line element
4) Saved it
5) In the sequence did a right click and "Edit Display Elements"
6) Removed the line model
7) Saved
In the sequence did a right click and "Edit Display Elements"
Greg.
1) Opened xLights
2) Opened your seuqnce
3) Added a line element
4) Saved it
5) In the sequence did a right click and "Edit Display Elements"
6) Removed the line model
7) Saved
In the sequence did a right click and "Edit Display Elements"Greg.
7
Nutcracker Effects / Canvas Blend-- Thanks!
« on: May 12, 2018, 08:48:50 AM »
Keith,
I believe in both of your last two "whats new" videos, you talked about how few folks would leverage the new Canvas option for blending Layers. I just wanted to say thanks for adding it. There have been numerous times where I wanted to "merge" multiple layers together and then manipulate it as one or use it as a master mask/unmask. It unleashes a whole lot of power!
Thanks,
Greg.
I believe in both of your last two "whats new" videos, you talked about how few folks would leverage the new Canvas option for blending Layers. I just wanted to say thanks for adding it. There have been numerous times where I wanted to "merge" multiple layers together and then manipulate it as one or use it as a master mask/unmask. It unleashes a whole lot of power!
Thanks,
Greg.
8
Nutcracker Effects / Re: How to make a lid effect on my mini trees?
« on: February 18, 2018, 09:11:33 AM »If you have something you like going up, try using the Layer-Panel->Roto-Zoom and change the Rotation Level. This generally works, but as show in this video (around 2:30) a few effects are not perfect. (Going up is fine, but coming down there are a few artifacts.)
https://youtu.be/EU6GWv_xGls?list=PLnG4kiQNFoIHROHzNe-2M8mN2tHlf0AjG&t=146
9
Latest xLights/Nutcracker software / Re: Website gives 206 error downloading Xlights.
« on: February 18, 2018, 08:51:51 AM »
Well. I tried Chrome and wget (as shown above) yesterday. Both had the problem.
Repeated again today and it is working (with both Chrome and wget as well as on multiple remote servers). Whatever the problem was, it is gone now....
Greg.
Repeated again today and it is working (with both Chrome and wget as well as on multiple remote servers). Whatever the problem was, it is gone now....
Greg.
10
Latest xLights/Nutcracker software / Re: Website gives 206 error downloading Xlights.
« on: February 17, 2018, 06:56:17 PM »
Guess I just don't have good luck. Tried to download from VMs in Nevada, New Jersey, Chicago, and my home server in Ohio. None of these allowed me to download the 64-bit installer file.
Greg
Greg
11
Latest xLights/Nutcracker software / Website gives 206 error downloading Xlights.
« on: February 17, 2018, 03:27:08 PM »
Tested from multiple clients (Linux and Windows) and multiple ISPs. I'm guessing it is a server issue.
--2018-02-17 17:24:54-- (try:17) https://xlights.org/downloads/xLights64_2018_05.exe
Connecting to xlights.org (xlights.org)|67.222.33.247|:443... connected.
HTTP request sent, awaiting response... 206 Partial Content
Retrying.
Note: 32-bit works fine, so it appears to be limited to the 64-bit file.
--2018-02-17 17:24:54-- (try:17) https://xlights.org/downloads/xLights64_2018_05.exe
Connecting to xlights.org (xlights.org)|67.222.33.247|:443... connected.
HTTP request sent, awaiting response... 206 Partial Content
Retrying.
Note: 32-bit works fine, so it appears to be limited to the 64-bit file.
12
Bugs in xLights/Nutcracker / Re: House background image doesn't Display (4.3.01 Linux)
« on: January 17, 2016, 04:01:19 PM »
I can now get the image to display, but the brightness slider still doesn't work.
Original image and slider work just fine in Windows port.
Greg
Original image and slider work just fine in Windows port.
Greg
13
Bugs in xLights/Nutcracker / House background image doesn't Display (4.3.01 Linux)
« on: January 17, 2016, 07:41:24 AM »
Using Ubuntu 14.04.3 LTS with 4.3.01. On the layout page, selecting an Image seems to work but the image is never displayed. The Brightness slider doesn't have a slide line which *could* be part of the problem, but I don't see the model groups either so it is likely more. There is a small blue box which *may* be the image. Hitting "Set Size" doesn't adjust it either. (Picture attached).
Thanks,
Greg.
Thanks,
Greg.
Pages: [1]