Messages

1

Do You Need Help? Post it here / Re: cbt16pc

« on: December 24, 2020, 07:54:35 AM »

http://www1.lightorama.com/Documents/DMX-DOC.pdf
Here is a link with LOR unit/channel numbers to DMX address, incase you don?t have this.


Sent from my iPhone using Tapatalk

2

Do You Need Help? Post it here / Re: Missing FSEQ files

« on: December 08, 2020, 02:38:55 PM »

I just did a copy of a file in my backup folder, that's in my Show folder and paste that sequence file in my Show folder and it worked. I am on 2020.53 xLights. I also deleted the .FSEQ file, then open the sequence file, .XSQ file in xLights, did a Render All then I clicked on Save. I had a .FSEQ file on that sequence that I saved in my Show folder. Not sure why you are not getting an .FSEQ file when you save the sequence. If you have not been, go to xLights Zoom room, https://xlights.org, click on ZOOM button.  You can share your desktop and someone might be able to see what the issue is on the screen.

3

Do You Need Help? Post it here / Re: Missing FSEQ files

« on: December 08, 2020, 12:30:30 PM »

Go to FILE upper left of xLights,, then Preferences, click on the TAB-sequences, in there make sure you have the (Save FSEQ on Save) checked marked. Then go to your sequence and click on the save. You should see you FSEQ file.

4

Do You Need Help? Post it here / Re: Xschedule

« on: December 08, 2020, 09:29:01 AM »

I found this site that has an older xLights, MAC xScheduler software 2018.55. You can start with this until you find the 2020.40. xScheduler https://www.techspot.com/downloads/7127-xlights.html

5

Do You Need Help? Post it here / Re: How often is Zoom meeting?

« on: October 19, 2020, 07:46:43 AM »

Make sure you have the latest Zoom software. I just had to update my Zoom because not all of the Zoom features were available.  Another way to access xLights Zoom is from xLights, open xLights then click on HELP, then click on Zoom.


Sent from my iPhone using Tapatalk

6

Bugs in xLights/Nutcracker / xLights Crash when opening FPP Connect in xLights

« on: October 04, 2020, 02:47:47 PM »

I have updated to xLights 20.41. Now when I click on FPP Connect in xLights under Tools, there is a pause, waiting for FPP Connect window opens up and then I get the Crash alert. This happens every time. I did not have this Crash issues when I was on 20.40 . xLights is on a MAC, OS 10.15.6. I have attached the crash report.

7

Do You Need Help? Post it here / Re: Trouble with configuring models (Mac version)

« on: June 11, 2020, 01:17:16 PM »

To get you on the right path, it would be best if you go to xLights Zoom room. In there you will share your screen and someone will guide you on your best options. Go to xlights.org then click on the Blue Zoom button. Click on Participants, at the bottom of the zoom screen, that will open another window, then at the bottom of Participants click on Raise Hand and someone will help you. Best time for help Mon.-Fri. 3:00pm-8:00pm PST. Just about anytime on the weekend.

8

Xlights Setup / Re: ZOOM PASSWORD??

« on: April 24, 2020, 04:21:19 PM »

You can also access xLights Zoom room from xLights sequence software by clicking on (HELP) then click on Zoom. This method to Zoom, you won't need a password.

9

Xlights Setup / Re: HELP!

« on: March 27, 2020, 05:25:37 PM »

If you rolled back to an xx.2019 from an xx.20 I don't think you can roll back to xx.19. If I remember correctly it states before upgrading to xx.20. There are people in the xlights zoom you may be able to help you now, jump in and share your screen for help.

10

My Show Setup / Re: what effect is this

« on: March 21, 2020, 01:45:46 PM »

Here you go. Like I said I just did very little amount but maybe that small amount might help you with other ideals. I used the song Carol Of The Bells by Lindsey Stirling. I setup four of 180 mini trees to test. Download the .xml file then click on import and then import the .xml file and drag and drop the trees that I have to your trees.

11

My Show Setup / Re: what effect is this

« on: March 19, 2020, 06:48:56 PM »

Ok, now you have more questions. 
I am fairly new to this stuff so I don't know much about the morph effect and handcrafting them I wouldn't know where to start.  Do you have any suggestions on how to create it using morph?
I started using the single line effect, but very time consuming process.
Thanks for all the help so far guys.

Ducebigalow, Have you figured out how to do the morph and some other settings? If not I can send you a small amount that I did.

12

My Show Setup / Re: what effect is this

« on: March 04, 2020, 03:41:41 PM »

I did not see anywhere on their YouTube or Facebook site that that states he used xLights to program the mini trees. He might have used LOR Superstar to get that affect. If you get a reply back, can you let me know? Just curious, that display of the mini trees does look good.

13

My Show Setup / Re: what effect is this

« on: March 02, 2020, 06:52:07 PM »

It looks like they are using the Boscoyo Mini trees. The effect being used could be the ON effect for each individual strand or the Single Strand Effect, which is my guess.  https://tinyurl.com/rjpek6f

14

Xlights Setup / Re: Just as I feared

« on: February 25, 2020, 04:43:00 PM »

Santacarl, if you are not on the xLight Zoom go to the xLights Zoom now. There are people in the room that can help you now.

15

Xlights Setup / Re: Just as I feared

« on: February 25, 2020, 03:02:46 PM »

Go to xlights.org, click on Zoom Meeting. Share your screen and someone will be able to help you get back on track with your setup. It's quiet in xLight's Zoom right now but there should be some people in the room at 3:00pm PST.