Messages

1

LOR / Re: LOR CMB16D-QC output problems

« on: December 06, 2017, 06:30:42 AM »

Keith,
Everything you are saying is correct and I completely agree and thank you for the replies but, my question is why an imported LOR sequence into Xlights (which is an on/off NOTt dimmer) is outputting a dimmer function rather than a full...is there something in Xlights I should check prior to importing? or could this be related to the serial output from the falcon 16fv3?...again, sorry if my question was not interpreted correctly.

2

LOR / Re: LOR CMB16D-QC output problems

« on: December 03, 2017, 06:10:06 AM »

I don't have it set to 65%...only the pixel string ports on the Falcon...Dc control boards are connected thru the serial port...thx...

3

LOR / Re: LOR CMB16D-QC output problems

« on: December 02, 2017, 05:29:34 AM »

Thx for the response but I'm not controlling lights, I'm controlling 12 volt relays...the problem is when migrating LOR sequence to Xlights, data sent to the LOR CMB16D  seems to be at a 55% intensity rather than an on/off.

4

LOR / LOR CMB16D-QC output problems

« on: December 01, 2017, 06:16:48 AM »

I have 3 LOR CTB16's , 2 CMB16DC and 1 CMB24DC running thru a Falcon F16v3 serial port with Xlights...I imported all sequences from LOR and everything is working fine...The issue is the output from the 12 volt DC LOR boards is only 6.6 volts...I have tested with LOR Hardware and the boards output the 12 volts DC correctly...on my falcon I have all string ports set to 65%...I have added a 19.5 volt Dc PS to get around the problem for now but want to see if there is a setting I missed via Xlights or Falcon to help resolve this issue...Xlights Version2017.30
Thx,
Mark