Author Topic: Marquee Effect  (Read 3293 times)

Offline Charles Belcher

  • Full Member
  • ***
  • Posts: 164
    • View Profile
Marquee Effect
« on: September 04, 2015, 11:52:29 AM »
Going through the manual and the marquee effect is not listed.  I supposed it is new.

It is the effect I need to do a running scroll across my eves.  Hats off to whoever developed it

ヽ(⌐■_■)ノ♪♬
2014 Finalist The Great Christmas Light Fight
2018 All Star The Great Christmas Light Fight

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Marquee Effect
« Reply #1 on: September 04, 2015, 11:59:45 AM »
Yep I just added that last week.  If you only needed to have that effect on a single line then you could have used the SingleStrand effect.  I hadn't tried the Marquee on a single row but I assume it would work.

I do have a couple enhancements I'm thinking of.  Like being able to offset the marquee from the edge and being able to scale the width and height.  With those controls you could place multiple smaller marquees on a matrix or maybe you just want a small marquee down in the corner of a matrix you could use those settings to do that.  Another option that would allow is to place multiple marquee effects with each one inside the previous one doing something different.

Offline Ed Slonka Jr

  • Newbie
  • *
  • Posts: 48
    • View Profile
Re: Marquee Effect
« Reply #2 on: September 04, 2015, 02:02:22 PM »
Quote
Like being able to offset the marquee from the edge and being able to scale the width and height.

+1 for this Gil   :)

Thanks, Ed

Offline kevinp

  • Sr. Member
  • ****
  • Posts: 373
    • View Profile
Re: Marquee Effect
« Reply #3 on: September 04, 2015, 03:34:59 PM »
Going through the manual and the marquee effect is not listed.

As soon as the effect was released I added the placeholder in the manual, and Gerry followed up with filling in the information. Only problem is the updated manual hasn't been released yet.  Steve can possibly give a timeline when he thinks the update will be available for everyone.
Kevin Pankratz
Blaine MN

Offline flyinverted

  • Administrator
  • Hero Member
  • *****
  • Posts: 756
    • View Profile
Re: Marquee Effect
« Reply #4 on: September 04, 2015, 05:13:00 PM »
I can do a release this weekend.. Probably saturday night. I just need to add one more page will do tomorrow eve.
Steve Giron
Maricopa County, AZ
xLights user with a boat-load of channels.

Do not ask to know all the answers, but ask to understand the question.

Offline gerry

  • Hero Member
  • *****
  • Posts: 695
    • View Profile
Re: Marquee Effect
« Reply #5 on: September 05, 2015, 06:19:48 AM »
Hi Steve,
Comments on First page needs to be removed as usual  :)
Gerry

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Marquee Effect
« Reply #6 on: September 05, 2015, 08:59:47 PM »
Ok I've got the new positioning settings done for the Marquee.  Here's a sample GIF showing 4 marquee all placed on a matrix at the same time.  You can see how they can now be positioned anywhere:
http://gph.is/1iphrro

One thing to note is when you get the next version it's best to go through your sequence and find any marquee effects and click on them and hit Update so it will store the new defaults.  Otherwise what I see happens is if you make position changes on a marquee and then start clicking on other ones that were created before these new options existed the program copies the settings from the last one you worked on.

Offline gerry

  • Hero Member
  • *****
  • Posts: 695
    • View Profile
Re: Marquee Effect
« Reply #7 on: September 06, 2015, 01:15:10 AM »
Looks very nice Gil,

When you release this , could you please do a short video , explaining the options/attributes. I know that some of them read similar to other effects (eg offset in pixels) and therefore folks that have used (the other) effects previously when first released know what they mean, but many of us are new .

Gerry

Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: Marquee Effect
« Reply #8 on: September 06, 2015, 07:04:46 AM »
I'll see.  Lately my audio hasn't been coming out good since I had to upgrade screencast-o-matic.  But the new options are all pretty much self-explanatory.  I could see the original options needing more explanation.  These are just changing the scaling size or moving the x/y position.  The position options were copied from Pictures.  The offset in pixels can be used to dial in exact pixel offsets instead of using percentages where you might have trouble dialing in an exact offset.  So its -100% to 100% when unchecked and -100 pixels to +100 pixels when checked.  If you check Wrap X and move the X position you'll see how it wraps.  The reason I've only provide an X wrap and not Y is mainly for 360 trees.  A 360 tree is a matrix wrapped around a circle so there's a seam in the back.  Using the WrapX you can make it look like there is no seam if you rotate the effect such that its crossing the seam.

Offline Ed Slonka Jr

  • Newbie
  • *
  • Posts: 48
    • View Profile
Re: Marquee Effect
« Reply #9 on: September 06, 2015, 08:49:36 AM »
Gil,

Nice addition! Can't wait for the release!

Thank you and all the development team for a great job!   :)  :D  :)

Ed

Offline gerry

  • Hero Member
  • *****
  • Posts: 695
    • View Profile
Re: Marquee Effect
« Reply #10 on: September 07, 2015, 12:11:22 AM »
One thing to note is when you get the next version it's best to go through your sequence and find any marquee effects and click on them and hit Update so it will store the new defaults.  Otherwise what I see happens is if you make position changes on a marquee and then start clicking on other ones that were created before these new options existed the program copies the settings from the last one you worked on.

Looking though github , I think that Gil meant :
Make any tweak  to the effect (each one in the sequence) and that will cause it to update the settings of the effect . Don't use the F5 button.
Gerry