Author Topic: A windows question If you don't mind  (Read 1932 times)

Offline bpducman

  • Sr. Member
  • ****
  • Posts: 407
    • View Profile
A windows question If you don't mind
« on: August 03, 2016, 06:48:34 PM »
I am using 2 monitors, the 2nd shows my whole house model. The issue I would like to address would be how to not have the glare of the first monitor affecting me being able to see the 2nd monitor more clearly.

Is there a way to accomplish this. I can only separate the monitors by so much. While the sequence is running the ideal would be to have the first monitor almost blank.

Am I dreaming

Brad
New PlayList is coming

Offline jnealand

  • Hero Member
  • *****
  • Posts: 1421
    • View Profile
Re: A windows question If you don't mind
« Reply #1 on: August 03, 2016, 08:39:09 PM »
I use multiple monitors and have never experienced glare problem.   You might want to try using your monitors hardware menu to turn the brightness down.
Jim Nealand
Kennesaw, GA

Offline JonB256

  • Hero Member
  • *****
  • Posts: 832
    • View Profile
    • My Christmas Website
Re: A windows question If you don't mind
« Reply #2 on: August 03, 2016, 09:36:04 PM »
You might try a piece of black cardstock between the monitors. It may only need to stick out a few inches.

If you turn off or cover the left monitor, does it really make a difference in viewing the right monitor? I never noticed.  Are they both in the same plane or is there an angle?

Offline bpducman

  • Sr. Member
  • ****
  • Posts: 407
    • View Profile
Re: A windows question If you don't mind
« Reply #3 on: August 04, 2016, 03:02:30 AM »
They are set at an angle and almost touch each other. The Left is shining on the right. I think I am going to get a larger table so I can separate a few inches and reduce the angle.

Thanks for the input.
New PlayList is coming

Offline Phrog30

  • Hero Member
  • *****
  • Posts: 1234
    • View Profile
Re: A windows question If you don't mind
« Reply #4 on: August 04, 2016, 08:11:22 AM »
I have mine touching and set at an angle. I have zero problems with glare.

Sent from my SM-G900V using Tapatalk


Offline Gilrock

  • Supporting Member
  • Hero Member
  • *
  • Posts: 6946
    • View Profile
Re: A windows question If you don't mind
« Reply #5 on: August 04, 2016, 08:19:00 AM »
Yeah don't buy those monitors that have the shiny surfaces.

Offline jnealand

  • Hero Member
  • *****
  • Posts: 1421
    • View Profile
Re: A windows question If you don't mind
« Reply #6 on: August 04, 2016, 09:38:05 AM »
I have mine touching and set at an angle. I have zero problems with glare.

Sent from my SM-G900V using Tapatalk

+1
Jim Nealand
Kennesaw, GA

Offline bpducman

  • Sr. Member
  • ****
  • Posts: 407
    • View Profile
Re: A windows question If you don't mind
« Reply #7 on: August 04, 2016, 06:43:47 PM »
Turned out to be a setting in my Multisync.

New PlayList is coming

Offline Phrog30

  • Hero Member
  • *****
  • Posts: 1234
    • View Profile
Re: A windows question If you don't mind
« Reply #8 on: August 04, 2016, 06:55:08 PM »
What does multisync have to do with glare? Me no comprende.

Sent from my SM-G900V using Tapatalk


Offline bpducman

  • Sr. Member
  • ****
  • Posts: 407
    • View Profile
Re: A windows question If you don't mind
« Reply #9 on: August 05, 2016, 02:43:45 AM »
My BenQ-32 "my main monitor" was set up so bright that I thought it was causing a bit of a glare. When I turned down it down and got a good background black on the BenQ it was apparent that it was not a glare it was the Nec not getting a good background black. After a few adjust I got the NEC Multisync a lot closer to what I wanted. The NEC is going to another project and I have another BenQ-32 coming that way both will be consistent.
Like normal I spoke too soon on the forum.
I apologize to all .

Brad
New PlayList is coming