Qiuck question about matrix

[t.jo13t]

I have 2 matrixes that have 18 strands high x 25 strands long and they are scrambled. I have 2 others That are 24 strands high and x 25 strands long they work fine. So my question is: the 2 with issues, are 4 strands of 100 and 1 strand of 50. I defined them as 9 Strands of 50 and 2 strings per strand. I had the same issue last year. Checked all the usual things Power, ect. So I am leaning towards layout. It all works in test mode on f16v1. The other matrixes 6 strands of 100  with 4 strings per strand and work fine

Thankyou Joe

[Gilrock]

I can't quite decipher how you have the trees wired up to give advice.  When you say you have a matrix that is x strands high and y strands long you realize that doesn't tell me whether the strands are horizontal or vertical.  It would be easier to just say you have a 18x25 matrix and specify whether it's horizontal or vertical.  You need to also say how it's wired.  Do the node loopback in a zig zag or does each strand begin on the same side.

[t.jo13t]

Lets see if this helps better. 18x25 horizontal.  4 strands of 100 and 1 strand of 50. I defined them as 9 Strands of 50 and 2 strings per strand 5 physical imputs to controller

Thankyou
Joe

[Gilrock]

So right click on the model and choose "Node Layout".  If the node numbering matches how you wired it up then the model layout is fine.

[jnealand]

Lets see if this helps better. 18x25 horizontal.  4 strands of 100 and 1 strand of 50. I defined them as 9 Strands of 50 and 2 strings per strand 5 physical imputs to controller

For future reference strands are part of a string.  i.e the zig and zag.  But we understood what you said.