Author Topic: AlphaPix 16 Controller set up help  (Read 1434 times)

Offline mmais

  • Full Member
  • ***
  • Posts: 212
    • View Profile
AlphaPix 16 Controller set up help
« on: June 25, 2017, 04:01:21 PM »
I am trying to set up in Xlights an AlphaPix 16 controller from Holiday Coro. Here is what I have done so far.
1. Set up & pinged the controller
2. Set up the controller in the browser. (see pic. below)
3. Set up one strip of lights in Xlights. See pic. below)
4. Opened the one strip in the test mode.

Everything is working on the controller, but when I get into xLights I can not an out put to the lights & they do not turn on. What did I do wrong??
Mike

Offline Phrog30

  • Hero Member
  • *****
  • Posts: 1234
    • View Profile
Re: AlphaPix 16 Controller set up help
« Reply #1 on: June 25, 2017, 05:14:27 PM »
What output on the controller is your lights connected? Did you check output to lights in test in xlights, the picture shows unchecked? You say everything is working on the controller, so that means an onboard test from the controller turned on lights?


Sent from my Pixel using Tapatalk


Offline mmais

  • Full Member
  • ***
  • Posts: 212
    • View Profile
Re: AlphaPix 16 Controller set up help
« Reply #2 on: June 25, 2017, 05:33:08 PM »
Did you check output to lights in test in xlights

That was the problem thanks. I knew it had to be something simple just could not see it.
Mike