Hey All,
When the major update came out, I was going to try to update my network to the controller connection and port numbers, etc. I just ended up making myself more confused and decided to leave it with absolute numbering and do not plan on uploaded anything to the controllers. I have 1 F16v3 with 2 expansion cards and 2 LOR boxes running off the f16 serial. XL seemed to import all my "old" universes correctly and I thought everything was great. But when I look at the visualizer, I get a ton of err messages like this (This is just part of the list). If I don't plan to upload anything, will I still be ok creating sequences and uploading them to FPP or is there something I need to change with my setup after seeing these errors? All the errors listed here reference LED models run off of the 2 LOR boxes. Thanks for any help.
ERR: Model Purple Shrubs on pixel port 3 has protocol but port protocol has been set to ws2811. This is because you have mixed protocols on your models.ERR: Model Red walk arch 1 on pixel port 3 has protocol but port protocol has been set to ws2811. This is because you have mixed protocols on your models.ERR: Model Big Tree RED on pixel port 3 has protocol but port protocol has been set to ws2811. This is because you have mixed protocols on your models.
